Product Label / Material Safety Data Sheet (MSDS)

Eco PCO WP X

Eco Pco WP X uses a knockdown method to control. The all natural, organic substance Eco Pco WP X is derived from plant oils such as rosemary, wintergreen, and thyme. The powerful residual lasts up to 3 mos.The natural substance of Eco Pco WP X allows it to be environmentally safe compared to other chemical products. Please note that Eco Pco WP X is a wettable powder and will leave a residue on dark surfaces so use with caution. Also please shake and mix well before using the product and shake the sprayer periodically while sprayer to make sure Eco Pco WP x has not settled down to the bottom. We recommend when purchasing this item you purchase a sprayer such as Chapin 1- 2 Gallon Sprayer.

Useful Tips You Should Know:

Eco Pco WP X is used to treat general surfaces, cracks and crevices and spot treatments.

Active Ingredient: 2- Phenethyl Propionate - 3%, Thyme oil - 5%, Pyrethrins - .50%

Size: 1 lb.

Yield and Mixing: 1 lb. EcoPCO WP X yields upto 32 gallon of emulsion. For general pest control, 3 tablespoons or 15 grams (0.5 oz.) of EcoPCO WP X per gallon of water.

Target Pest: Ants, Boxelder Bugs, Centipedes, Cockroaches, Crickets, Earwigs, Firebrats, Fleas, Millipedes, Pillbugs, Silverfish, Sowbugs, Termites, Bees, Carpenter Bees, Carpenter Ants, Cockroaches, Fire Ants, Scorpions, Spiders, Wasps

Registered States: AL, AK, AZ, AR, CA, CO, CT, DE, DC, FL, GA, HI, ID, IL, IN, IA, KS, KY, LA, ME, MH, MD, MA, MI, MN, MS, MO, MT, NE, NV, NH, NJ, NM, NC, ND, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VT, VA, WA, WV, WI, WY

What are EcoPCO Products

Designated as "bio-pesticides" by the Federal EPA, EcoPCO products provide the same benefits as conventional products in terms of efficacy (knockdown/kill and residual protection), ease-of-use, application costs, indoor and outdoor applications and fragrance (unscented), but with the benefits of a botanic active ingredient.

EcoPCO X products utilize new technology developed by EcoSMART that uses plant oils in place of piperonyl butoxide to synergize pyrethrum. This discovery not only provides a dual mode-of-action, but more importantly it creates PY-based products that provide residual protection comparable to conventional products.

Advantages of EcoPCO WP X

• Quick knockdown/kill


• Residual protection


• Indoor/outdoor use


• Non-staining


• Mild fresh scent


• Unscented when diluted

Application Equipment Preparation for Eco PCO WP X:

For best results, thoroughly wash out sprayer and screens with water and detergent before using EcoPCO WP X. To avoid sprayer clogging, do not use strainers or screens finer than 50 mesh size. Mixing Procedures: Carefully open container by holding it near its base, avoid squeezing the container as this causes contents to puff out at the user.

Quantities to be used given in volumetric terms( tablespoons or cups) and also by weight (grams and ounces). The product is supplied with a measuring scoop.

Using the scoop included with the package, scoop out the desired amount of product for each application. When finished, rinse and scoop with water, rest should go in tank. Dry and return scoop to the container. Close container.

For best results, use EcoPCO WP X as follows:

• Fill applicator tank 1/2 with water.


• Add desired EcoPCO WP X


• Allow 1 to 2 minutes for powder to wet.


• Agitate, stir, or shake applicator tank,


• Finish filling applicator tank and agitate again before use to ensure satisfactory suspension

For Boxelder Bugs, Cockroaches, Sowbugs, Pillbugs, Spiders, Crickets, Scorpions, Millipedes, Centipedes, Silverfish, and Firebats Treatment with EcoPCO WP X:

Apply as a coats, low-pressure treatment to areas where these pests hide or where they may enter the premises. Applications should include cracks/ crevices and void areas around and behind interior and exterior walls, cabinets, baseborads, moldings, sinks, pipe openings, storage areas, closets, and appliances. Repeat as necessary.

For Ants and Carpenter Ants Treatment with EcoPCO WP X:

Apply as a coarse, low-pressure treatment to any trails,a round doors and windows, around and behind cabinets, walls and similar areas where ants may be found. Pay particular attention to cracks/ crevices and void areas where ants can enter the premises. Apply perimeter barrier treatment to prevent infestation. Repeat necessary.

For Bees, Carpenter Bees and Wasps Treatment with EcoPCO WP X:

Thoroughly treat nest and entrance, surfaces, and surrounding areas where these insects alight. May be used inside residential buildings as well as in and around carports, garages and storage buildings.

For Fire Ants (mounds) Treatment with EcoPCO WP X:

Apply as a drench. Gently sprinkle (watering can) a total of 1 gallon over the surface of mounds up to 1 inch in diameter and 2 gallons for larger mounds. Thoroughly wet mound and surrounding areas. Treat new mounds as they appear. All colonies in the vicinity should be treated.

For Scorpions Treatment with EcoPCO WP X:

Treat and remove accumulations of lumber, firewood, and other materials that serve as harborage sites. Apply as a coarse spray to the point of drip.

For Termites Above Ground (Excluding Formosan) Treatment with EcoPCO WP X:

Apply to voids and galleries in damaged wood and in spaces between wooded members of a structure and between wood and foundations where wood is vulnerable. Applications may be made to inaccessible areas by drilling and then injecting with a crack and crevice injector into the damaged wood or void spaces. Applications to attics, crawl spaces unfinished basements, or man- made voids may be made with a coarse fan spray to control workers and winged reproductive forms of termites in mud shelter tubes. This type of application is not intended to be a substitute for soil treatment. It is intended to kill localized infections or termites.

Pantry Pests (of exposed adult and immature stages of insects) Treatment with EcoPCO WP X:

make application to cupboards, shelving and storage areas. Particular attention should be given to treating cracks and crevices and other harborage areas. Remove all utensils, uncovered foodstuffs (or any with package opened), shelf paper and other objects before treating. Allow treated surfaces to dry and cover shelves with clean paper before replacing utensils, foodstuffs or other items.

Outdoor surfaces use with EcoPCO WP X:

For control of ants, bees, centipede, cockroaches, crickets, earwigs, firebrats, fleas, flies, millipedes, pillbugs, scorpions, silverfish, sowbugs, spiders, wasps and other similar perimeter insect pests.

Apply with either a hand or power application equipment as a residual treatment to surfaces or buildings, porches, screens, door and window frames, eaves, patios, garages and other similar areas where these pest are found. Also may be used for applications to landscaped areas in and around residential, commercial, institutional, and industrial buildings where these pests are active.

Please refer to and follow information on Eco PCO WP X product label.